TOMMYKAIRA JAPAN go home!! Japanese inqiry 会社案内
PRICE gallery エアロパーツサイズ表 カタログダウンロード en infomation
EXTERIOR EXTERIOR EXHAUST BRAKE/SUSPENSION INTERIOR ACCESSORIES

Brand name 3parts Aero Kit FRP Version・・・Front Bumper+Side Step+Rear Bumper
Material FRP Instructions(pdf) ----
Price ¥270,000 Commodity code 1S001X00
Price/Coating done ¥334,000 Commodity code/Coating done 1S001X00#
Price/Separate coating done ¥341,000※1※2※3 Commodity code/Separate coating done 1S001X00##
Brand name 3parts Aero Kit FRP Version・・・Front Bumper+Side StepVersionII+Rear Bumper
Material FRP Instructions(pdf) ----
Price ¥320,000 Commodity code 1S001X01
Price/Coating done ¥390,000 Commodity code/Coating done 1S001X00#
Price/Separate coating done ¥397,000※1※2※3 Commodity code/Separate coating done 1S001X00##
Size front bumper forward direction 25mm , downward direction 20mm / rear bumper backward direction 20mm
Notes As for the separate coating, please check the attention points.
Brand name 4parts Aero Kit FRP Version・・・Front Bumper+Side Step+Rear Bumper+Rear Gate Spoiler
Material FRP Instructions(pdf) ----
Price ¥310,000 Commodity code 1S001X02
Price/Coating done ¥384,000 Commodity code/Coating done 1S001X02#
Price/Separate coating done ¥391,000※1※2※3 Commodity code/Separate coating done 1S001X02##
Brand name 4parts Aero Kit FRP Version・・・Front Bumper+Side StepVersionII+Rear Bumper+Rear Gate Spoiler
Material FRP Instructions(pdf) ----
Price ¥360,000 Commodity code 1S001X03
Price/Coating done ¥435,000 Commodity code/Coating done 1S001X03#
Price/Separate coating done ¥447,000※1※2※3 Commodity code/Separate coating done 1S001X03##
Size front bumper forward direction 25mm , downward direction 20mm / rear bumper backward direction 20mm
Notes As for the separate coating, please check the attention points.
Brand name 5parts Aero Kit FRP Version
・・・Front Bumper+Side StepVersionII+Rear Bumper+Roof spoiler+Rear Gate Spoiler
Material FRP Instructions(pdf) ----
Price ¥340,000 Commodity code 1S001X04
Price/Coating done ¥420,000 Commodity code/Coating done 1S001X04#
Price/Separate coating done ¥427,000※1※2※3 Commodity code/Separate coating done 1S001X04##
Brand name 5parts Aero Kit FRP Version
・・・Front Bumper+Side StepVersionII+Rear Bumper+Roof spoiler+Rear Gate Spoiler
Material FRP Instructions(pdf) ----
Price ¥390,000 Commodity code 1S001X05
Price/Coating done ¥476,000 Commodity code/Coating done 1S001X05#
Price/Separate coating done ¥483,000※1※2※3 Commodity code/Separate coating done 1S001X05##
Size front bumper forward direction 25mm , downward direction 20mm / rear bumper backward direction 20mm
Notes As for the separate coating, please check the attention points.
Brand name 4parts Aero Kit FRP Version including Wet Carbon Roof spoiler and Rear Gate Spoiler
・・・Front Bumper+Side Step+Rear Bumper+Rear Gate Spoiler
Material FRP+WetCarbon Instructions(pdf) ----
Price ¥340,000 Commodity code 1S001X06
Price/Coating done ¥390,000 Commodity code/Coating done 1S001X06#
Price/Separate coating done ¥420,000※1※2※3 Commodity code/Separate coating done 1S001X06##
Brand name 4parts Aero Kit FRP Version including Wet Carbon Roof spoiler and Rear Gate Spoiler
・・・Front Bumper+Side StepVersionII+Rear Bumper+Rear Gate Spoiler
Material FRP+WetCarbon Instructions(pdf) ----
Price ¥390,000 Commodity code 1S001X07
Price/Coating done ¥460,000 Commodity code/Coating done 1S001X07#
Price/Separate coating done ¥470,000※1※2※3 Commodity code/Separate coating done 1S001X07##
Size front bumper forward direction 25mm , downward direction 20mm / rear bumper backward direction 20mm
Notes As for the separate coating, please check the attention points.
Brand name 5parts Aero Kit FRP Version including Wet Carbon Roof spoiler and Rear Gate Spoiler
・・・Front Bumper+Side StepVersionII+Rear Bumper+Roof spoiler+Rear Gate Spoiler
Material FRP+WetCarbon Instructions(pdf) ----
Price ¥390,000 Commodity code 1S001X08
Price/Coating done ¥430,000 Commodity code/Coating done 1S001X08#
Price/Separate coating done ¥470,000※1※2※3 Commodity code/Separate coating done 1S001X08##
Brand name 5parts Aero Kit FRP Version including Wet Carbon Roof spoiler and Rear Gate Spoiler
・・・Front Bumper+Side StepVersionII+Rear Bumper+Roof spoiler+Rear Gate Spoiler
Material FRP+WetCarbon Instructions(pdf) ----
Price ¥450,000 Commodity code 1S001X09
Price/Coating done ¥500,000 Commodity code/Coating done 1S001X09#
Price/Separate coating done ¥530,000※1※2※3 Commodity code/Separate coating done 1S001X09##
Size front bumper forward direction 25mm , downward direction 20mm / rear bumper backward direction 20mm
Notes As for the separate coating, please check the attention points.
Attention ※1 We are supposed to do the separate coating on the part of the upper lip spoiler and around the fog lamp.
As for the separate coating on the other parts, we can do the coating at a change of 5000yen per one part.
※2※3 We are supposed to do the same separate coating as our demo car. As for the color for the coating,
rplease referto the following color numbers.
the color for the coating the color for the separate coating the specs of the separate coating of our demo car
37J Satin white-Pearl Black Front Bumper Side Step
D4S Crystal black-Silica Mat black Base color Satin white-Pearl Base color Satin white-Pearl
F3T Graphite gray-Metallic Silver Around fog lamp Mat black Inside the slit Mat black
E8H Galaxy blue-Silica Mat silver Center duct cover Mat black Rear Bumper
C6Z Steel silver-Metallic Gray Nose duct Mat black Base color Satin white-Pearl
  Mat gray Side duct Mat black Under diffuser Satin white-Pearl
        Center Mat black

Brand name Front Bumper(With LED spot lamp)
Material FRP Instructions(pdf) ----
Price ¥123,000 Commodity code 1S001A20
Price/Coating done ¥148,000 Commodity code 1S001A20#
Price/Separate coating done ¥149,000 Commodity code 1S001A20##
Size front bumper forward direction 25mm , downward direction 20mm
Notes

※1 The parts are coated with the genuine color Satin White Pearl,(37J)、Steel silver-Metallic(C6Z)、Graphite gray-Metallic(F3T)、Crystal black-Silica(D4S)、Galaxy blue-Silica(E8H)
※As for the color for the separate coating, you can choose from three colors; also glossy or dull, wich means six patterns.
Black、Mat black、Silver(1F7)、Mat silver(1F7)、Gray(1G6)、Mat gray(1G6)

Brand name Rear Bumper(with Back Fog Lamp)(for PREMIUM 01S)
Material FRP Instructions(pdf) save_pdf
Price ¥100,000 Commodity code 1S001P50
Price/Coating done ¥125,000 Commodity code 1S001P50#
Price/Separate coating done ¥126,000 Commodity code 1S001P50##
Size ---    
Notes

*Our Rear Bumper is suitable just for our High Performance Exhaust System PREMIUM 01S(both side 4pipes).

*1 As for the part for the separate coating, it is supposed to be around the rear diffuser and the rear reflector.
In case you would like the separate coating except the above-mentioned part, you are required to pay 5,000yen for the coating per one part.

* Please fill in the blanks of the specs request form at a separate sheet.(the separate coating instructions: rear)

*2 Our Rear Bumper is equipped with the genuine back fog lamp for Z34.
(Our LED Back Fog Lamp and a relay kit are an optional extra for general purpose.
As for the wiring kit for combination, you are required to prepare for it separately)

Brand name Front Grille(FACE I/Fin)
Material FRP Instructions(pdf) save_pdf

Price

¥38,000 Commodity code 1S001C00

Price/Coating done

¥42,000 Commodity code 1S001C00#
Size ---    
Notes ※1 The parts are coated with the genuine color Satin White Pearl,(37J)、Steel silver-Metallic(C6Z)、Graphite gray-Metallic(F3T)、Crystal black-Silica(D4S)、Galaxy blue-Silica(E8H)
Brand name Front Grille(FACE II/Net)
Material FRP Instructions(pdf) save_pdf
Price ¥24,000 Commodity code 1S001C01
Price/Coating done ¥28,000 Commodity code 1S001C01#
Size ---    
Notes ※1 The parts are coated with the genuine color Satin White Pearl,(37J)、Steel silver-Metallic(C6Z)、Graphite gray-Metallic(F3T)、Crystal black-Silica(D4S)、Galaxy blue-Silica(E8H)
Brand name Front Grille(FACE III/Net)
Material Wet Carbon Instructions(pdf) save_pdf
Price ¥57,750 Commodity code 1S001C02
Size ---    
Notes ※Clear coated done
Brand name Side Step
Material FRP Instructions(pdf) save_pdf
Price ¥54,000 Commodity code 1S001J00
Price/Coating done ¥68,000 Commodity code/Coating done 1S001J00#
Price/Separate coating done ¥73,000 Commodity code/Coating done 1S001J00#
Size ---    
Notes ※common with BM
※1 The parts are coated with the genuine color Satin White Pearl,(37J)、Steel silver-Metallic(C6Z)、Graphite gray-Metallic(F3T)、Crystal black-Silica(D4S)、Galaxy blue-Silica(E8H)
Brand name Side Carbon Under Flap
Material WetCarbon Instructions(pdf) save_pdf
Price ¥58,000 Commodity code 1S001J10
Size ---    
Notes

※Clear coating done

Brand name Side Step+Side Carbon Under Flap (Clear coating done) set
Material FRP+WetCarbon Instructions(pdf) save_pdf
Price

¥100,000

Commodity code 1S001J20
Price/Coating done

¥120,000

Commodity code 1S001J20
Price/Separate coating done

¥125,000

Commodity code 1S001J20
Size ---    
Notes


Brand name Side Garnish
Material ABS Instructions(pdf) save_pdf
Price ¥45,000 Commodity code 1S001J30
Size ---    
Notes  

※The product in the image is made of Carbon.
Brand name Rear Gate Spoiler
Material※ WetCarbon Instructions(pdf) save_pdf
Price ¥72,000 Commodity code 1S001T40
Material FRP    
Price ¥42,000 Commodity code 1S001T30
Price/Coating done ¥52,000 Commodity code 1S001T30#
Size ---    
Notes ※Clear coated done

※The product in the image is made of Carbon.
Brand name Rear Roof Spoiler
Material WetCarbon Instructions(pdf) save_pdf
Price ¥58,000 Commodity code 1S001R10
Material FRP    
Price ¥38,000 Commodity code 1S001R00
Price/Coating done ¥44,000 Commodity code 1S001R00
Size ---    
Notes  
Brand name Rear Bumper(for normal muffler)
Material FRP Instructions(pdf) ----
Price comingsoon Commodity code ---
Size ---    
Notes

 

Brand name PREMIUM 01S Rear Piece(TB)(Both side 4pipes)
Material Stainless Steel (SUS304) Instructions(pdf) ---
Price/Slide※1

¥135,000

Commodity code 1S001Z011
Price/Slide※2

¥135,000

Commodity code 1S001Z019
Price/No slide※1

¥120,000

Commodity code 1S001Z010
Size --- Weight  
Notes

【 We have satisfied the new regulation standards. 】 
As for the new regulation standards, please click here for the details. →the new regulation standards
■Material・・・Stainless Steel(SUS304)
■Main Pipe diam・・・Φ60mm                   
■tail diam./tail shape・・・Φ120×80mm Oval/blac finish of the puffiest part
■the noise level within the close area・・・88.5dB(We have satisfied the new regulation standards.)
■Slide・・・60mm
■accessory: a set of the bolt and the gasket
※1 The genuine Rear Bumper and the back panel need processing.
※2 This is a slide-type muffler for the TOMMYKAIRA original bumper.
The back panel needs processing.

PREMIUM 01S リヤピース(TB)(両側4本出し)
Brand name PREMIUM 01S Rearpiece(NA)(Both side 4pipes)
Material Stainless Steel (SUS304) Instructions(pdf) ---
Price/Slide

¥135,000

Commodity code 1S001Z013
Price/Slide

¥135,000

Commodity code 1S001Z020
Price/No slide

¥120,000

Commodity code 1S001Z012
Size --- Weight  
Notes

【 We have satisfied the new regulation standards. 】 
As for the new regulation standards, please click here for the details. →the new regulation standards
■Material・・・Stainless Steel(SUS304)
■Main Pipe diam.・・・Φ60mm                   
■tail diam./tail shape・・・Φ120×80mm Oval/blac finish of the puffiest part
■the noise level within the close area・・・88.5dB(We have satisfied the new regulation standards.)
■Slide・・・60mm
■accessory: a set of the bolt and the gasket
※1 The genuine Rear Bumper and the back panel need processing.
※2 This is a slide-type muffler for the TOMMYKAIRA original bumper.
The back panel needs processing.
※3 In case you make use of a Rear Piece(NA), you are supposed to use our PREMIUM 01S Center Pipe as well. You are expected to purchase both of them, which means that the Rear Piece cannot be installed in the genuine Center Pipe.

PREMIUM 01S センターパイプ
Brand name PREMIUM 01S Straight Pipe※1
Material Stainless Steel (SUS304) Instructions(pdf) save_pdf
Price

¥44,000

Commodity code 1S001Z00
Size ---    
Notes

※1 Straight pipe is a product for a race that is not adaptable to the car inspection standards, which means that you are not allowed to drive on the public streets with the pipe in your car.
Due to the improvement of the engine output, the engine control unit needs setting again.

PREMIUM 01S ストレートパイプ※1
Brand name PREMIUM 01S Center Pipe
Material Stainless Steel (SUS304) Instructions(pdf) ---
Price

¥80,000

Commodity code 1S001Z01
Size ---    
Notes

※We are now in application for the new regulation standards concerning the noise level by acceleration. For this reason, we cannot install our exhaust system in the vehicle produced after April 1, 2010 at the moment.
※ In case you make use of a Rear Piece(NA), you are supposed to use our PREMIUM 01S Center Pipe as well. You are expected to purchase both of them, which means that the Rear Piece cannot be installed in the genuine Center Pipe.

キャリパー
Brand name

TOMMYKAIRA High Performance Brake System

Material --- Instructions(pdf) ---
Price/full kit ¥720,000 Commodity code 1S001Y00
Price/front kit ¥398,000   1S001Y01
Size --- agreement  
Notes Front/6POT Caliper rotor diam 355Φ Rear/4POTCaliper rotor diam 330Φ
Caliper/Silver Almite Rotor/Carving slit 2P Rortor Brake hose/Stainless steel mesh
Color:Red , Black , Champagne Gold(The standard color is Silver Almite.)
Painting fee:Right/Left ¥20,000, Full ¥40,000
車高調KIT
Brand name

High Performance Suspension Kit

"TOMMYKAIRA Original Suspension Kit"

Material --- Instructions(pdf) ---
Price

¥293,000

Commodity code 1S001S02
Size --- agreement BR/BM LEGACY 2.5GT
Notes Full Tap Decrement Power 30 stages adjustment
Spring rate/F 7kg R 5kg  
※common with BM
車高調KIT
Brand name High Performance Suspension Kit

"TOMMYKAIRA X ENNEPETAL BILSTEIN Suspension Kit"

Material --- Instructions(pdf) ---
Price

¥260,000

Commodity code 1S001S00
Size ---    
Notes spring rate F:6Kg/R:5Kg
※common with BM
車高調KIT
Brand name

High Performance Suspension Kit

"TOMMYKAIRA Original Suspension Kit"*adjustable shock absorber

Material --- Instructions(pdf) ---
Price

¥380,000

Commodity code 1S001S01
Size ---    
Notes ※common with BM

Brand name Premium Interior Selection(DryCarbon)
Material --- Instructions(pdf) ----
Price comingsoon Commodity code 1S001MT002
Size ---    
Notes Photo→Premium Interior Collection
Brand name SPORTEC Floor Mat
Material --- Instructions(pdf) ----
Price ¥55,000 Commodity code 1S001MT002
Size ---    
Notes  

Brand name Cargo Mat
Material --- Instructions(pdf) ----
Price ¥28,000 Commodity code 1S001MT003
Size ---    
Notes  

レガシィ専用サンシェード
Sun Shade for LEGACY
 
1S001AP001

¥8,500

レガシィ専用サンシェード
RR Emblem VersionII NEW!!
 
9ME109

¥8,000

レガシィ専用サンシェード
LED Back Fog Lamp 
 
6L0001

¥34,000

レガシィ専用サンシェード
LED Back Fog Lamp (equipped with a relay kit)  
6L0002

¥42,000


Make eyes
TOMMYKAIRA CCFL "Make eye's"※1
 
 
1S001I00
Sales only in japan.
Make eyes
Head Light Inside Painting ※2 
 
 
1S001I01
Sales only in japan.
LED emblem
LED Illumination Emblem
(front for the genuine Grille)
 
1S001LED001
¥20,000
LED emblem
LED Illumination Emblem
(front for the Grille of general purpose and Grille of FaceIII)
1S001LED004
¥20,000

LED emblem
LED Illumination Emblem
(Rear for the wagon)
 
1S001LED005
¥20,000
LED emblem
LED Illumination Emblem (front for the genuine Grille and Rear for the wagon set)
1S001LED006
¥38,000
LED emblem
LED Illumination Emblem
(front for the Grille of general purpose and Rear for the wagon set)
1S001LED008
¥38,000
Type1
LED Illumination Number Frame Type1
 
9AP107
¥8,000

Type2
LED Illumination Number Frame Type2
9AP108
¥8,000
LEGACY
LED Door Sill Plate
"LEGACY"Version(front L/R)
1S001SF001
¥32,800
TOMMYKAIRA
LED Door Sill Plate
"TOMMYKAIRA"(front L/R) 
1S001SF002
¥32,800

 

※Attention※
●After your purchase of our products, you are required never to remodel them   because there is a possibility of serious accidents or breakdowns.
●There are times when parts-installation causes improper use of a garage jack Please keep this in mind beforehand.
●In case you draw a car with Front Spoiler, there might be a possibility of the deformation of the Spoiler .
exterior parts
●As for the coated parts, they are almost genuine colors.
●Although stainless steel plates are installed in the Side Steps of our demo car,  our products are supposed to be equipped with aluminum plates. (Stainless Steel plate is an optional extra.)
●As for the Rear part of the car, traction hook cannot be used due to the character of the design.
About handling and installation of LED spot lamp

※Please make sure to read the following sentences in advance.

※You are required to remove the battery wires of a car before you start to install the product.  
■The product is made for a car of DC12V. Please do not ever use the product for the other cars.
■You are required to check out the lighting before starting to install the product. In case there is a defect in the early stages, please get back to a sales shop or make inquiries in the prescribed form (Inquiry) of TOMMYKAIRA Project Department as soon as possible.  
■The voltage surge may cause damage to LED. In case there is a voltage of more than 14.5V in the wires you are supposed to connect, please stop connecting.   
■Because there is resistance in the contraction tube attached to a power connector, please do not ever cut the tube or overload it.
■In case you connect the wires, you are required to connect the earth wire (the black wire) first. If you connect the plus wire first, this may cause damage to the product.  
■Please refrain from starting your engine with LED lights on.
■Please insert the coupler firmly to its base.
■Please be careful you do not put much power at the base of both the spot LED unit and the coupler
when you get together the wires.
■The installation of the product requires expertise. So you are required to ask a skilled car mechanic 
to install the product in your car at well-equipped factories or workshops.
■In case you install the product, please make sure to check out the function of the product before installation. We are not going to guarantee the product when you have found the product faulty after installation. 

■In case you break the product while installing, we are not going to take responsibility and guarantee the product. We would like you to understand this point beforehand.
■Please handle the product itself, the attachment harness, and so on with care. Otherwise, your forcible handling may cause the snapping of a wire and malfunction.  
■Please do not ever switch on and off repeatedly too often.
■After getting together the extra parts of harness without slackening, please be careful you do not band them too firmly.
■As for the installation and the fixing of the product, you are expected not to work at a hot and humid place. You are also expected to keep the part you are supposed to install the product in airy.   
■There are some products that need the processing such as hole-making. In that case, please be careful you do not cause damage to the product or your car. We are not going to take responsibility for that even if you do damage to your car while processing. We would like you to understand this point beforehand.   
■You are expected to do the waterproofing on every part you are supposed to install the product in
by making use of silicone sealant etc.
■In case you find defects or damage in the product or your car before installation, please stop working and using the product immediately, and get back to a sales shop where you have purchased the product. 
■Please do not ever use the power of the product from the same source as the other electrical appliances.
※The above–mentioned work includes the lighting work such as lighting, flickering, and dimming. Please check it out with the use of 12V power etc.

※Attention
●As for the additional damage (an engine trouble, a fire, and the other accidents) caused by the product and the loss (the cost of a phone call and a rental car, the compensation for suspension of business, hotel charges, and the commercial loss etc) caused by the additional damage, we are not going to take responsibility for them and guarantee them. We would like you to understand this point beforehand.  
●In case there is a defect in the product after your proper installation, you are expected to send the product to us first. After our careful inspection of the product, we will respond to the problem by repairing the product or sending you a replacement (※within the warranty period). In case you cause much damage to the product, however , we are not going to guarantee the product.
●As for a warranty that was not issued by us and that you have not filled in the blanks precisely, we regard it as invalid.       
●Because we are not going to reissue a warranty, please keep it carefully.
●A warranty that does not say the date of your purchase and the name of a sales shop is invalid.
●The warranty period is six months from the date of your purchase of our products.
※In case you install our Spot LED, you are required to observe above-mentioned attention points.
※In case you do not install our Spot LED according to above-mentioned attention points, we are not going to guarantee them even if they break down. Please keep this in mind.

infomation
■About reflector
The Rear half Spoiler of our demo car makes use of the reflector for VELLFIRE(Z) without using the genuine reflector in order to make our Spoiler more stylish.

■the warranty period of our original LED items
   for six months after the date of your purchase

   We can offer you the parts for repair as well. One Spot LED costs 1,800 yen. 



■About the nets equipped with our aero parts
※2 About the nets equipped with our aero parts
Although all the nets of our demo car are coated with black paint, the original nets are
supposed to be a silver color.

■You can purchase our products at TOMMYKAIRA products shops and car goods shops in the whole country. Please feel free to make inquiries at nearby car goods shops.
Also, we are willing to consult you about the installation of our products and stuff like that. Please feel free to make inquiries in the prescribed form. → Inquiry
Click here for the contents of our factory →TK FACTORYTKF_banner

 

■About our Front Bumper
※about the head light washer
In case the vehicle is a S-Package (2.5i & 2.5GT) that has a front bumper equipped with
the head light washer, you are required to prepare for the lamp washer nozzle (left and
light, the genuine SUBARU one) and the lamp washer nozzle cover ASSY (left and right,
the genuine SUBARU one ) for a L-Package front bumper separately by yourself.
In case the vehicle has a front bumper without the head light washer, we are supposed
to produce our Front Bumper without making a hole for the head light washer, so please
give us the details of your vehicle when you place an order of our Front Bumper.

※Although you are able to attach the head light washer to our Front Bumper by processing
the installation part of the head light washer, you are supposed to make a slight
adjustment of your vehicle, actually. Also, we are not going to listen to you complain
about the damage caused by your processing. we would like you to understand this point
beforehand. (As for the positions of your processing, click here for your reference.)
In addition, you are required to prepare for the genuine washer nozzle cover for a
L-Package as well by yourself due to the differences in the shape of the nozzle cover.

※about our LED Spot Lamp
The warranty period of our LED Spot Lamp in our Front Bumper is six months.

■About our Rear Bumper
※about the back fog lamp for our Rear Bumper
Because you are supposed to take advantage of the function of the genuine rear fog
lamp for installation of the back fog lamp, you are not able to use the genuine rear
fog lamp along with the back fog lamp. Also, we do not guarantee you as to the back
fog lamp because this back fog lamp is produced based on the genuine rear fog lamp
for Z34. However, the warranty period of our LED Back Fog Lamp (an optional extra) is
the same as our LED Spot Lamp; six months.

※Our Rear Bumper fits our PREMIUM 01S 4 Pipes only at the moment. As for our Rear
Bumper that can fit the 2 Pipes muffler, we would be grateful if you could wait for us to
start producing it in the future.


agreement list
BM9 LEGACY B4 2.5i 2.5i
L Package
2.5i
EyeSight
2.5i
S Package
2.5GT 2.5GT
EyeSight
2.5GT
S Package
OUTBACK
Front Bumper ○※1 ○※1 ×
Side Step ×
Side StepVer.Ⅱ ×
Rear Bumper ○※2 ○※2 ○※2 ○※2 ○※2 ○※2 ○※2 ×
Roof Spoiler
Rear Gate Spoiler

※1 about the head light washer
In case the vehicle is a S-Package (2.5i S-Package&2.5GT Eye Sight/GT S-Package)
equipped with the head light washer, you are required to prepare for [the lamp washer nozzle
for the normal bumper 5,600 yen × 2] and [the lamp washer nozzle cover ASSY 2,760 yen × 2]
separately.

※2 Our Rear Bumper for BM9 fits TOMMYKAIRA original muffler [PREMIUM 01S 4 Pipes] only.
In case of NA vehicles, you are required to prepare for the Center Pipe separately. In case of
Turbo vehicles, you have only to replace the Rear Piece for installation.